Dedicated To The Smallest Of Skiffs banner
41 - 60 of 109 Posts
Discussion starter · #41 ·
rigging and gear on the boat will be as simple as it gets.
no battery, hand bilge pump, anchor, safety gear required by law and a home made yeti load out box to keep things dry Like registration and fire extinguisher etc.
also added a tackle web thing to the back of the cooler to toss whatever in
everything possible is through bolted and sealed with life seal

f
Image

Image

Image

Image

Image
Image
 
Picked up a 22’ moonlighter and got it installed with the v marine guide holders, they’re nice View attachment 222756
View attachment 222757
View attachment 222760


took it out for the first test run and this happened in the carb. I was probably not paying attention when I put it together after a rebuild and the screw holding the lever wasn’t tightened. I knew what happened as soon as it died at full speed and fuel was pouring out of the cowling
my wife thought this was hilarious


View attachment 222761
View attachment 222762 Once I got the needle and float lever installed I took it out the next day… 17-22 knot winds perfect! ran it straight into the wind and was seeing 25 knots and a pretty smooth ride in about 1ft chop. My stock aluminum prop blows out at low speeds on turns and starts to cavitate when getting up on plane so I’m gonna have to tinker with that. If anyone has recommendations on where to start with this id appreciate it.

Im pretty much done besides tweaking the trailer a little. Does anyone know where I can get side bunks for the stern? I’ll be finishing up the poling and casting platforms in the next few weeks and then gearing up for a 3 month deployment that’ll take me into next year.

the tiller extension makes for a good paddle in a pinch. I knew I should’ve bought the push pole before the first test run View attachment 222763
Now that’s hilarious, a true waterman 😂
 
I’ve been waiting for a detailed home build of one of Harry’s hulls. I’ve been waiting for the right time to sell my rig and have harry start one, I just keep having random expenses pop up and delaying me. Looks like you finished this is in a pretty reasonable amount of time. Very nice looking work done far, keep everyone posted.
 
Discussion starter · #54 ·
I’ve been waiting for a detailed home build of one of Harry’s hulls. I’ve been waiting for the right time to sell my rig and have harry start one, I just keep having random expenses pop up and delaying me. Looks like you finished this is in a pretty reasonable amount of time. Very nice looking work done far, keep everyone posted.
I had the same problem until I just decided it’ll never be the right time and did it
 
Discussion starter · #60 ·
That is some Amazing work you have done!
Harry is finishing up a Evergladez for me now.
I wish that I could have done what you accomplished but not likely. Lol. That's why I chose Harry.
Thank you for your Service!
Beautiful Skiff!
If I ever build another it’ll be that hull
 
41 - 60 of 109 Posts