yami 20 f/s need help

Discussion in 'Prop Shop' started by strauser95, Jul 4, 2012.

  1. strauser95

    strauser95 I Love microskiff.com!

    4
    0
    71
    hey guys i have a yami 20 on a glades skiff its 14 ft long 4ft wide about 150#. i love this thing i have a homemade jackplate (fixed) i know i have it high i am trying to keep it up to run skinny. the problem i have is that it blows out in turns pretty bad. it has stock 9 1/4x12 prop on it and is pretty beat up. i want maybe a four blade to try to get more grip in the turn. if i have to i will lower the motor a lil bit but like to try a prop first. speed isnt an issue two people and gear it will grabe 32 mph. and it pops right out of the whole. it keeps good water pressure too. also i have fins on the motor but would like to put a cavi plate on it. any help would be great.
     
  2. Brett

    Brett > PRO STAFF <

    3 blade cupped prop would be my choice, same diameter and pitch.
     

  3. cutrunner

    cutrunner Cert. Yamaha technician

    X2
    Unless your also unhappy about the time it takes to plane off (realisticly with a 20hp of course)