Dedicated To The Smallest Of Skiffs banner
1 - 3 of 3 Posts

·
I Love microskiff.com!
Joined
·
83 Posts
Discussion Starter · #1 ·
So my 99 Johnson stoped pumping water. I took the foot off and replaced the impeller, housing, and all the gaskets/Orings. There was no indication that anything was wrong with the old impeller. I did notice that the washer at the top of the water pick up tube was trashed, so I replaced it also. I put it all back together and still nothing. So I replaced the thermostat and all associated gaskets with that, put it back together and and now I am getting drips of water but no real stream. Is there something I am missing? Thanks
 

·
I Love microskiff.com!
Joined
·
83 Posts
Discussion Starter · #7 ·
Thanks everyone. I will give some of these a shot and report back.


What is the idea behind how the fuel mixture affects the water flow? I did notice there is quite a bit of oil in my engine cowling. and leaking out of the foot (not foot oil, just changed it, it was full and had good color (not milky). Please see the attached post from before.


http://www.microskiff.com/cgi-bin/yabb2/YaBB.pl?num=1285901222/0#0
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top