I was given a finger nail polish drying light. I will use a UV flashlight to set the resin then put the fly on a piece of foam and put in the the nail dryer. 30 seconds later it is cooked and dry.
UV Resin Curing Light
I haven't seen much discussion about it so I thought I would post a tip.
I found a UV light for curing resin from a 3D printer and it plugs in to the wall so it cures quickly with NO tack. No need to put a finish coat over the resin. Amazon carries it for $18. Compared to $50+ for the flashlight style it's a pretty easy decision.
Here's the link to the one I bought:
(Edited to clean up the grammar)
I found a UV light for curing resin from a 3D printer and it plugs in to the wall so it cures quickly with NO tack. No need to put a finish coat over the resin. Amazon carries it for $18. Compared to $50+ for the flashlight style it's a pretty easy decision.
Here's the link to the one I bought:
Amazon.com: 3D Printer UV Resin Curing Light for SLA DLP 3D Printer Solidify Photosensitive Resin 405nm UV Resin Affect with 60W Output Affect, DIY Curing Enclosue US Plug : Industrial & Scientific
Amazon.com: 3D Printer UV Resin Curing Light for SLA DLP 3D Printer Solidify Photosensitive Resin 405nm UV Resin Affect with 60W Output Affect, DIY Curing Enclosue US Plug : Industrial & Scientific
www.amazon.com
(Edited to clean up the grammar)
1 - 1 of 13 Posts
1 - 1 of 13 Posts
