Dedicated To The Smallest Of Skiffs banner
1 - 1 of 1 Posts

·
I Love microskiff.com!
Joined
·
91 Posts
On mine it went hitch/swing arm joint/winch stand- that way you can pull the pin and the tongue is free to swing, if it was set up hitch- winch stand -then the joint the winch strap cranked tight to your boat would not allow you to disconect and swing the swing arm. Standard size ball is a 2" ball. As far as angle- it all depends on your set up my buddys truck needs a drop down hitch attachment, my old suv needed a riser, my current needs a drop down. My recomendation is you should try to set it up where your trailer is level when attached to the vehicle. and when attached adjust your bunks on the trailer so the deck of the boat is slightly angled back. That way 3 things can happen that are needed;  when you pull your boat out of the water and open your drain plug the water will come out instead of going up to the nose of the boat, if it starts raining the rain will run out the back and not fill up the nose which can cause water damage  to items in the boat  or make your boat too heavy if it fills up the nose and damage/snap your trailer, and it makes it easy to wash your boat for the same reason as with the rain...
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top