[mro]

I just got two 100 ft spools of 16 awg tinned wire.
One at $13.89 and one just over $15.00 delivery included.
didn't get it for the trailers but would work there too.

Prices very widely but if you check ever few days you can get a deal.

 

[mro]

I got those two off eBay.
Sorry, that info should have been included...
Amazon was about double as well as most of the adds on eBay.

For trailer lights.
I run the wires through the trailers frame.

Had a transport trailer at work that had problematic lights and no way to run the wires inside the frame. I was just going to wirer tie them emplace along the frame but walking through the shop I saw my pile of industrial hose.
I wire tied some 5/8" rubber hose to the inside of the frame, then used a vacuum to suck a piece of rag with mono tied to it through the hose to pull the wires through.
Where the wires exited the hose I used some "gasket maker" type automotive sealant then a piece of heat shrink.

 

[mro]

can you post the clips again

What clips are you referring to?

_

Amazon $9.50, free ship (50 feet)

Amazon.com

for led lights 16 awg tinned is more than enough.
If you were to run pvc pipe you could seal the ends like I did to my hose so it would become water proof. Instead of using the "gasket maker" stuff i used I don't see why silicone calking wouldn't work and it's only a few bucks. I just used what I had on hand.

 

[mro]

Might take a look at this.
If this won't do I'd call them to see if they something else that will.

Heyco SunRunner Stainless Steel Cable Clip | Webo Solar

Shop Heyco SunRunner Stainless Steel Cable Clip | CALL US and get answers fast! | Flat shipping rates.

webosolar.com

 

[mro]

Ask if the clip works on the thickness of the metal your attaching it to

 

[mro]

https://www.etrailer.com/Boat-Trailer-Parts/CE-Smith/CE27600K90.html?feed=npn&utm_source=google&utm_medium=cpc&utm_campaign=Google%20%7C%20Shop%20-%20Boat%20Trailer%20Parts&adgroupid=89022318194&campaignid=202804817&creative=404001548300&device=c&devicemodel=&feeditemid=&keyword=&loc_interest_ms=&loc_physical_ms=9032047&matchtype=&network=g&placement=&position=&gclid=CjwKCAjw55-HBhAHEiwARMCszpP8qBTpJ_S-PWV0BFFr4dIMJE9fJFUZKhXGTOlcG5glCUSXjoEN2xoC5GUQAvD_BwE

I have a set of bolt on side bunks on the Nymph trailer.
When I get around to it (hopefully soon) I'll be putting some on a little 12 footer trailer too.
They are a real help loading in the wind or cross current which I do alone 90 percent of the time.
That said... my lights are mounted on the trailer and get submerged each use.