Dedicated To The Smallest Of Skiffs banner
1 - 2 of 2 Posts

·
Registered
Joined
·
418 Posts
Discussion Starter · #1 ·
Hey just put a new tach on the boat, hooked up per instructions all the settings are right, but when i get on the gas it goes up to about 1200 rpms and then drops to zero, what the heck is going on any suggestions?


Alex
 

·
Registered
Joined
·
418 Posts
Discussion Starter · #3 ·
OK i have checked all the connection and have made sure all the settings are right found out i had it on the wrong setting, put it to the right one and hooked it up just like the old one was, i went from teleflex to teleflex tach and now i get to about 2400 rpms and it goes to zero, looks like i will be contacting teleflex technical dpt in the morning to see what i am missing here.

Alex
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top