Dedicated To The Smallest Of Skiffs banner

SOLD 2001 Hell's Bay Whipray

17660 22
For Sale is a 2001 Hells Bay Whipray 16', Garage Kept under A/C.
Custom 2014 AmeraTrail Trailer

-2001 Mercury 40hp 2 stroke, Last Full Service was May, New plugs, New impeller, New Stator
-Garmin GPSmap 441
-Forward Deck Mount Trolling Motor Bracket (Birdsall Marine Design(not Pictured))
-New Non-skid
-New Under Gunnel Carpet
-New Bennet Trim Tabs
-Updated Poling Platform: The poling platform was made by Blue Point (Chris did the job beautifully) and is a design that marries the old style Whipray platform (original forward leg mounting location) with the new model Whipray platform (rear leg mounting location--slightly modified). There have been two others produced in this style since this one was made--this was the first.
-The fuel tank is epoxy coated, It is Sherwin-Williams SeaGuard 5000 HS tinted to match the cream gel coat. It is more durable and is specifically formulated for steel and aluminum surfaces.
-Updated Stainless Hatch Latches
-New Gas Lines
-Cowling has a crack on top

This boat is in great shape and poles amazingly. I typically fish 2-3 adults, but my kids are growing and wanting to fish with us more often. So with a heavy heart it's time to step up. If interested in additional details and pics, please contact me.

Boat is located in Ormond Beach, FL.
$29,000.00

three eight six, two nine nine, six one two one.



Vehicle Bass boat Boat Speedboat Boat trailer
Vehicle Transport Automotive exterior Car Building
Vehicle Boat Dinghy Skiff Watercraft
Water transportation Vehicle Boat Bass boat Skiff
Helmet Metal
Floor
1 - 20 of 23 Posts

· Registered
Joined
·
434 Posts
Couple of additional notes:

-The poling platform was made by Blue Point (Chris did the job beautifully) and is a design that marries the old style Whipray platform (original forward leg mounting location) with the new model Whipray platform (rear leg mounting location--slightly modified). There have been two others produced in this style since this one was made--this was the first.
-The fuel tank is epoxy coated, but not with coal tar epoxy. It is Sherwin-Williams SeaGuard 5000 HS tinted to match the cream gel coat. It is more durable and is specifically formulated for steel and aluminum surfaces.
-Fuel fill and vent lines were also replaced along with the fuel vent.
-The trim tab actuators are Lenco Marine. They are new, as mentioned.
-All hardware has been removed and bedded in silicone.
-The engine also has a new starter solenoid.
-The non-skid color is Moondust. (Great color choice OP!!) It was sprayed with Axalta Imron MS-600 (competing paint to Awlgrip). The poling platform insert has new gel coat (cream color with non-skid).

The OP has cared for this boat very well. You will not be disappointed.
 
1 - 20 of 23 Posts
Top