Dedicated To The Smallest Of Skiffs banner

1 - 20 of 40 Posts

·
I Love microskiff.com!
Joined
·
2,820 Posts
Discussion Starter #1
ok guys up for sale is the famous mud minnow low tide fishing machine :cool:

heres what we got:
1. 1997 16'3" mud minnow ( 58" wide at its widest point) very stable boat
2. 2003 merc 2 stroke tiller short shaft w/ stainless prop, new 6 gal. tank,  and electric start ( electric starter not working and needs replaced or rebuilt but otherwise the motor starts 1-2 pulls and purrs like a kitten)
3. 2004 continental galv. trailer with new hubs/bearings, new fenders, new l.e.d. lights, new "e" rated fat pontoon boat trailer tires on new galvanized rims for good flotation if pulling over loose sand etc.., the trailer itself is in excellent shape
4.new wiring and switches
5.new shark eye lights on the bow and flip up light on the platform
6. custom casting and poling platforms with 4 welded on rod holders. built 1 year ago when the boat was redone
7. front deck with below deck storage
8.hatch in rear bench seat that can be used for storage or a cooler
9.  hummingbird 405sx depth finder installed new 1 year ago
10. new rub rail 1 year ago when boat was redone
11. khaki paint outside with interlux brightside on the inside and deck
12. 3 side mounted rod holders
13. minnkota 55 lb. thrust trolling motor and marineco deck plug w/ deep cycle battery
14. below deck mounted 2 stone "power bubbles" air pump (to keep them mud minnows alive ;)
15. bilge pump
16. folding front seat removeable from the casting platform
17. 20' push pole
18. igloo cooler w/stainless turnbuckles

this boat is in great condition and gets attention everywhere it goes, floats shallow too  :cool: title in hand for easy hassle free exchange.
asking $5000.00, all reasonable offers considered, located in jacksonville florida.  making room for a new project :eek:
email:  [email protected]

][/img]

[/img]

][/img]

[/img]

[/img]

[/img]

[/img]

[/img]

[/img]

[/img]
 

·
Registered
Joined
·
660 Posts
i love the boat..... wish i had an extra 5k laying around..... good luck with the sale..... you wouldnt happen to want a worked over 327 vette motor would ya :D
 

·
I Love microskiff.com!
Joined
·
2,820 Posts
Discussion Starter #4
oh yeah, almost forgot about the sunshade mod that will also be going with the boat , for the sunny days when its hot out there ;)

[/img]

[/img]
 

·
Registered
Joined
·
660 Posts
"you wouldnt happen to want a worked over 327 vette motor would ya"

Yeah, he could put it in his next micro. :)
i tell you what... if you could get this motor into a micro itd be REALLY scary.......hell, in almost any boat it would be scary.... it pushes +/- 450-500hp
.....

Not trying to jack your thread here, just a free bump for a nice boat....
 

·
I Love microskiff.com!
Joined
·
2,820 Posts
Discussion Starter #6
"you wouldnt happen to want a worked over 327 vette motor would ya"

Yeah, he could put it in his next micro. :)
i tell you what... if you could get this motor into a micro itd be REALLY scary.......hell, in almost any boat it would be scary.... it pushes +/- 450-500hp
.....

Not trying to jack your thread here, just a free bump for a nice boat.... 
thanks for the compliment  :cool: i have had guys that were probably to old to drive flag me down at red lights wanting to know the specs on her :-* she's soooo sexy  ;) ;D
 

·
I Love microskiff.com!
Joined
·
2,820 Posts
Discussion Starter #8
couple more pics from today ;)
[/img]

[/img]
 

·
I Love microskiff.com!
Joined
·
2,820 Posts
Discussion Starter #10
Seems like you have that thing set up perfectly...what are you moving into??
i'm getting bored and need a new project, i'm actually looking to sell a 2007 century 2202 bayboat with yamaha 250 four stroke too :eek:  i seldom keep anything longer than 3 years plus i need to stream line my operation a bit ;)

[/img]
 

·
I Love microskiff.com!
Joined
·
2,820 Posts
Discussion Starter #11
mention you saw it on microskiff and i'll go $4,750.00 :eek:
 

·
I Love microskiff.com!
Joined
·
2,820 Posts
Discussion Starter #13
All I see are red x's
that weird because i see everything, try clicking on the red x and see if a menu pops up that says "show pictures"
 

·
I Love microskiff.com!
Joined
·
2,820 Posts
Discussion Starter #15
Can we work out a payment plan?
sorry dude but i'm not in a postition to finance, thanks anyways
 

·
I Love microskiff.com!
Joined
·
2,820 Posts
Discussion Starter #17
someone needs to buy this boat. Why buy a gheenoe this looks like it floats just as shallow but is more boat
:D
amen brother ;) make an offer, i need to make room for my new ride :cool:
 

·
I Love microskiff.com!
Joined
·
2,820 Posts
Discussion Starter #19
is the new project being built in titusville?
nah but your kinda close(atleast within the state ;D) not wanting to let the cat out of the bag yet but hopefull i'll have some details to share early next week ;)
 

·
I Love microskiff.com!
Joined
·
479 Posts
My $.02...since I think you have a nice lil boat that someone is out there looking for.

Post on Craigslist too, if you haven't already. I've learned that you can sell boats on here, but you might have better luck on Craigslist since most of the guys on here already have micros. This site is great and this is by no means a dig at the site, but it really is easier to sell the outboards and accessories on here than it is the hull and trailer (or a fully loaded boat). Just a thought, take it as you will. Either way good luck with the sale.
 
1 - 20 of 40 Posts
Top