Dedicated To The Smallest Of Skiffs banner

Mercury Carb Question

2109 Views 6 Replies 4 Participants Last post by  lawnservice321
I have a 96 25hp mercury, it has been sitting for a few years and it seems like the gaskets need to be replaced on the carb. Gas seems to be coming out of everywhere on the thing.
It has a manual choke. I found a 2000 mercury carb that looks the same except it seems to have electric choke on it. My question is can I install this new carb and use the electric choke somehow or can I take the electric choke off and put my manual on that one? any input would be appreciated. Thanks
1 - 1 of 1 Posts

· Registered
Joined
·
788 Posts
Hi Skiffsky,

If you want you can go to this website ad compare the part numbers and see a diagram of the carbs involved. Most electric chokes from the era you are talking about have the same linkage with a solenoid for the electric added.

http://search.ebscohost.com/

I think the user name and PW will come up. If not User name is marshall and PW is public. Go to small engines>marine or outboards> and then Mercury.

Best regards,
Frank_S
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top