Dedicated To The Smallest Of Skiffs banner

Mercury Carb Question

2107 Views 6 Replies 4 Participants Last post by  lawnservice321
I have a 96 25hp mercury, it has been sitting for a few years and it seems like the gaskets need to be replaced on the carb. Gas seems to be coming out of everywhere on the thing.
It has a manual choke. I found a 2000 mercury carb that looks the same except it seems to have electric choke on it. My question is can I install this new carb and use the electric choke somehow or can I take the electric choke off and put my manual on that one? any input would be appreciated. Thanks
1 - 1 of 1 Posts

· > PRO STAFF <
Joined
·
7,717 Posts
Clean and rebuild the old carb.
Kits are not that expensive.

http://www.crowleymarine.com/parts/3788.cfm

Contains everything needed to repair or replace worn components.

I like the older carbs because of the adjustable idle needle.
You really can tune the outboard to best running condition.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top