Dedicated To The Smallest Of Skiffs banner
1 - 1 of 1 Posts

·
Registered
Joined
·
84 Posts
I don’t want to hijack this thread, but: I’m about to reinstall the twin 8’ power poles on my Baycraft. They came loose which was a bit of a surprise. I found the bolts only finger tight. There is no information on the correct torque in the fitting instructions. The maunfacturer tell me this is because it ‘depends on the transom’. Any thoughts on getting the correct torque? I also found the rubber washers had completely deteriorated after less than a year. Curious how often people change them, or if they upgrade?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top