Joined
·
2 Posts
Hi all , I stumbled across this site while trying to get some info on a speed controller for a trolling motor. There seems to be a lot of knowledgeable members here so i joined.
What i am trying to do is bypass the control head of a older minnkota 30 lb ( with the speed coils ),
and use pwm to control the speed to gain longer trolling time. It has been done according to some with
rc controllers (mamba max ) but they can get pricey and it would appear that there may be some programing involved via pc which i would like to avoid. Does any one have any suggestions on what type of economical controller might work best or if anyone has done this which controllers should i avoid.I am also curious about h20 problems, ( protecting them from the rain and such )
Thanks
What i am trying to do is bypass the control head of a older minnkota 30 lb ( with the speed coils ),
and use pwm to control the speed to gain longer trolling time. It has been done according to some with
rc controllers (mamba max ) but they can get pricey and it would appear that there may be some programing involved via pc which i would like to avoid. Does any one have any suggestions on what type of economical controller might work best or if anyone has done this which controllers should i avoid.I am also curious about h20 problems, ( protecting them from the rain and such )
Thanks
