Joined
·
152 Posts
After a long wait it looks like I’m next and should get in the mold next week for my East Cape EXOx.
- 2019 East Cape Evo X
- Boat hull and console will be green with lighter shade of same color on the deck. (see color sample picture attached)
- added awlgrip upgrade to inside of all hatches
- 4” thick bolt down cushion white with black piping.
- removable backrest
- Standard Aluminum Trailer
- Removable Trailer tongue
- Suzuki 60hp black
- Batteries in console
- no buckets in rear hatches
- bucket in front hatch with interior access hatch to forward area.
- Insulated live well
- trolling motor plug inside front hatch
- guide mount Minn Kota Ipolit trolling motor (starboard)
- custom made larger under gunwale rod holders
- four rod holders forward and two facing backwards
- black rub rail
- switches and engine key in glove box
- removable aluminum color V marine push pole holders
- standard engine tach gauge in addition to Nema connection from engine to Simrad.
- Simrad G09 with totalscan transducer
- Brushed aluminum two step poling platform
-Two weldon on rod holders on the polling platform
- Weld on plate on poling platform for PP micro anchor
- Weld on plate for low profile stern light
- just added V Marine rolling tarpon transom plate to build.
![Green Wall Technology Electronic device Electronics]()
- 2019 East Cape Evo X
- Boat hull and console will be green with lighter shade of same color on the deck. (see color sample picture attached)
- added awlgrip upgrade to inside of all hatches
- 4” thick bolt down cushion white with black piping.
- removable backrest
- Standard Aluminum Trailer
- Removable Trailer tongue
- Suzuki 60hp black
- Batteries in console
- no buckets in rear hatches
- bucket in front hatch with interior access hatch to forward area.
- Insulated live well
- trolling motor plug inside front hatch
- guide mount Minn Kota Ipolit trolling motor (starboard)
- custom made larger under gunwale rod holders
- four rod holders forward and two facing backwards
- black rub rail
- switches and engine key in glove box
- removable aluminum color V marine push pole holders
- standard engine tach gauge in addition to Nema connection from engine to Simrad.
- Simrad G09 with totalscan transducer
- Brushed aluminum two step poling platform
-Two weldon on rod holders on the polling platform
- Weld on plate on poling platform for PP micro anchor
- Weld on plate for low profile stern light
- just added V Marine rolling tarpon transom plate to build.
