Dedicated To The Smallest Of Skiffs banner

Fiberglass

3K views 6 replies 4 participants last post by  chew 
Fix only the crack.
You need to remove all the damaged fiberglass from the crack.
Sand off all the gelcoat or paint from around the crack.
Then fill the resulting hole with multiple layers of fiberglass and resin.
This should be done from both inside the hull and out.
Otherwise there's a good chance the crack will return.
After hardening, sand smooth, then paint.

Instruction videos for fiberglass hull repair are available for free on line.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top