SOLD/EXPIRED East Cape Gladesmen Kevlar

Discussion in 'Sold/Expired Classifieds' started by skinnywater3, Jan 7, 2015.

  1. skinnywater3

    skinnywater3 Well-Known Member

    744
    6
    393
    2006 East Cape Borski Gladesmen (Kevlar build)

    2004 25hp Mercury 2 stroke with electric start and a stainless 3 blade 13 pitch Vengeance prop

    Carbon Marine tiller extension

    Bob's Machine Shop manual jackplate

    Lenco trim tabs

    276C Garmin gps

    Pop up running lights, anchor light, cockpit light, and transom LED light

    Storm gray Seadek throughout the cockpit, on the rear poling platform, and under the gunnels for real protection

    Line X pad under the bow for protection from oysters and beaching

    Blacked out Ramlin trailer so you can load and unload the skiff with only getting the tires wet.
    This trailer has the break away tongue option.

    This skiff runs in the low 30's and poles effortlessly. If you have been looking for a Gladesmen this is the one, it is decked out with all of the right options. East Cape only made a handful of these Borski builds.

    ORLANDO

    $9000

    If you have any questions email/text/call
    Chad.mont@yahoo.com 407-462-1492



    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. Sean_Schlobohm

    Sean_Schlobohm I Love microskiff.com!

    112
    0
    91
    Interested in any trades?
     

  3. AfterHours2

    AfterHours2 Stripper in my own Mind!

    2,546
    136
    918
    Nice Gman Skinny. I'm sure it won't last long. Miss mine with a passion and if I didn't have a growing family then i would still own it..
     
  4. Sandalous

    Sandalous Well-Known Member

    171
    51
    103
    Sweet. I have been meaning to list mine for the last month. Very similar boat to yours. Good luck with sale
     
  5. Permit75

    Permit75 I Love microskiff.com!

    20
    0
    31
    The Hull is White? The other pics look like a light yellow.
     
  6. 6wt

    6wt I Love microskiff.com!

    26
    0
    31
    Do you have pics of the front bottom of the boat, and the Line-X pad area?

    Also, what is the length of the boat?

    Thanks!
     
  7. skinnywater3

    skinnywater3 Well-Known Member

    744
    6
    393
    The decks are white and the hull is a light grey. The hull may have appeared yellowish as those pictures were taken while the sunsets reflection was popping off the skiff.

    The Gladesmen length is 17'6".

    I will go out in the garage and take some pictures of the Line-X pad and the hull in the direct sunlight.
     
  8. timc@desoto.net

    timc@desoto.net I Love microskiff.com!

    16
    0
    76
  9. 6wt

    6wt I Love microskiff.com!

    26
    0
    31
    Thanks for the pics! Looks great.

    Was there any damage/repair/rash prior to the Line-X pad application?

    Tried unsuccessfully to get spec info from East Cape for this boat... may i ask, a) what is the beam? b) what is the size of the cockpit? area c) what is the coast guard rating lbs/persons? d) hp rating e) still searching for kevlar manufacturing info, any link/assistance would be appreciated.

    Thanks!
     
  10. skinnywater3

    skinnywater3 Well-Known Member

    744
    6
    393
    The line-x pad is original to the boat, it is not hiding any damage. What is your email address? If you shoot me an email at chad.mont@yahoo.com I will answer all of your questions.
     
  11. cutrunner

    cutrunner Cert. Yamaha technician

    Beautiful skiff
    these hulls are the epitamy of a TRUE poling skiff
     
  12. skinnywater3

    skinnywater3 Well-Known Member

    744
    6
    393
    Thank you for all the compliments guys, the skiff is still for sale.
     
  13. Little_Willy

    Little_Willy I Love microskiff.com!

    50
    1
    83
    Does it have power trim Thanks
     
  14. skinnywater3

    skinnywater3 Well-Known Member

    744
    6
    393
    No power trim.. The motor weighs only #114. The skiff does have a jackplate.
     
  15. austin_gross18

    austin_gross18 I Love microskiff.com!

    38
    0
    31
    do you want to sell the engine 2398777380
     
  16. jaredbrier

    jaredbrier Well-Known Member

    33
    0
    81
    How does the boat balance out with the jack plate and 25hp engine? Is it a 25" shaft on that engine?
     
  17. orlgheenoer

    orlgheenoer Well-Known Member

    Such a pretty boat wish I could take it off your hands.