Dedicated To The Smallest Of Skiffs banner

Cost of painting a 16 ft flats boat hull?

5K views 3 replies 4 participants last post by  yobata 
#1 ·
Looking at a 16ft project hull that needs to be repainted and was just curious what the ballpark range was for something like that. I'm sure its going to need some fairing, etc. so this could be a wide range but it's a start. Only the bottom of the hull would need to be painted, I would tackle the topside.
 
#3 ·
Highly dependent on the condition, but $2.5K-$4k. Color is a big driver (reds, yellows, and oranges can be outrageous). The amount of fairing and prep work is the biggest cost and the reason for the large spread. Flipping the boat is roughly a 2 hour affair in each direction. Your materials cost for sundries, primer, paint, etc., is in the $1500 range.

This cost estimate is based on using epoxy primers and LPU class paints (Awlgrip, Imron, Sterling, etc.).
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top