Dedicated To The Smallest Of Skiffs banner
1 - 2 of 2 Posts

·
Living & Dying in 3/4 Time
Joined
·
2,558 Posts
I have an '84 Evinrude 9.9, thought about doing the same myself.  However it is more than just the carb; it also includes a reed spacer and exhaust housing. IMO unless you are getting the engine for almost free, trying upgrade to the 15hp rating is not worth it.

P.S. - Working on this engine is very easy.

Take a look at the link below tons & tons of info on your engine.


http://www.sschapterpsa.com/ramblings/Johnson 9.9_15.htm

Edit: Watch ebay for the carbs, saw one go for ~$150 before.
 

·
Living & Dying in 3/4 Time
Joined
·
2,558 Posts
GF - My classic ran 13 mph fully loaded with the 9.9. That was with a buddy, myself, way to much gear and not hitting optimum RPM's. Never ran it solo but would expect around 18mph.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top