Dedicated To The Smallest Of Skiffs banner

1 - 13 of 13 Posts

·
"The Flats Solicitor"
Joined
·
478 Posts
Discussion Starter #1
Here are the long awaited photos. This unit is one of several going to a Kayak manufacturer. So it has tie-down straps and a bimini swivel on the bases. Rigid mounted units will have a variety of mounts options depending on the boat and the length. Pricing will start at $135 for a basic model, 30 inches tall and 11.25 inches width, 1.125 inch diameter at the crown with simple bolt-on, stand-off spacers (no shelf for mounting switches or GPS units). This units weighs 13 ounces. Call me directly if you have any suggestions or questions. Joe 813 928 9887.

Yes Jan, the universal pivoting rod holders are next.  ::)



 

·
Curmudgeon Emeritus
1996 Scout 192 Sportfish
Joined
·
4,939 Posts
Yes Jan, the universal pivoting rod holders are next.  ::)
Please note you account has been temporarily suspended until such time that rod holders have been completed. ;D

Grab bar looks good!
 

·
Won "Do More With Less" Award!
Joined
·
1,715 Posts
Here are the long awaited photos. This unit is one of several going to a Kayak manufacturer. So it has tie-down straps and a bimini swivel on the bases. Rigid mounted units will have a variety of mounts options depending on the boat and the length. Pricing will start at $135 for a basic model, 30 inches tall and 11.25 inches width, 1.125 inch diameter at the crown with simple bolt-on, stand-off spacers (no shelf for mounting switches or GPS units). This units weighs 13 ounces. Call me directly if you have any suggestions or questions. Joe 813 928 9887.

Yes Jan, the universal pivoting rod holders are next.  ::)



SWEET! ;)
 

·
Hammer in my hand still pounding on a screw
Joined
·
258 Posts
Can you make one that will mount on to the gunwhale and to the floor as well? Thats what I want!
 

·
"The Flats Solicitor"
Joined
·
478 Posts
Discussion Starter #8
Yes, I just installed a GrabPillar on a Highsider and the owner got a 3 foot TillerPillar for his Yamaha 9.9HP 4S.  They look and work great.  Now the driver can shift his weigh forward to improve the angle of attack while planing out and see what is in the water as he runs.





Float Shallower,
Joe
Carbon Marine
813-928-9887
 

·
"The Flats Solicitor"
Joined
·
478 Posts
Discussion Starter #10
I make them for Unique Yaks who in turn provides them to other NuCanoe dealers.

Joe
 

·
Living & Dying in 3/4 Time
Joined
·
2,558 Posts
can you make it with the back rest and dash pannle?
Call or Email Joe. I havn't seen him on the forum in long time.
 
1 - 13 of 13 Posts
Top