Dedicated To The Smallest Of Skiffs banner

Bait well plumbing problem

933 Views 2 Replies 3 Participants Last post by  DuckNut
I have 2 bait wells on the bunks of my flats boat. While having the cap off restore I had problems with the restorer and got my boat back with the cap held on with 3 screws sans the rub rail. After I got everything back together I dicovered the 2 bait wells lost their drain hoses. I don't want to take the rub rail off and the cap then jack it up and fix this. I need a solution to fix it as is. My plan is to put a drain hose down the center of the drains and silicon them in since ther is no pressure on the liquid. They both have a hole at the bottom that should drain to the inside of the bunks. I can supply pictures if needed

Thanks for any help
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.