Dedicated To The Smallest Of Skiffs banner

Attcahing a Rub Rail

1461 Views 7 Replies 3 Participants Last post by  Cam
So I have been performing some gel coat repairs and had to detach areas of rub rail. The rub rail is riveted to the cap and I am looking for a way to reattach the rub rail without using rivets. I plan on replacing the rub rail next fall/winter after the boat gets painted and for now I just want to reattach so I can use the boat. So school me on an easy, effective & fairly inexpensive way to reattach the rub rail.

Thanks in advance,
1 - 1 of 8 Posts
Most I have seen use a sealant and screws. Short term I suspect you could just use screws.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.