This is a 16'8" technical poling skiff capable of running in less than 6" of water. I have driven this thing across water (undisturbed) and watched tournament Majek and ShallowSport boats bottom out trying to follow us. Boat comes with a Yamaha F60 with warranty through October 2016 and motor has about 30-40 hours. Lenco Trim Tabs are inset and trim tab controls are on the console. You could pretty much drive the boat with just the trim tabs (not recommended though). Here are the technical specs from Ranger: LOA -- 16'8" Beam -- 6'9" Draft -- 5.5" Dry weight -- 540 Fuel capacity - 17 Max HP -- 60 In addition, the boat comes with the following accessories and estimated retail prices: - Power Pole shallow water anchor with remote and console switch ($1,500) - MinnKota Riptide SP 55 wireless trolling motor with remote, removable motor mount and 12V trolling battery with Perko switch ($1,250) - Bob's Machine Shop Ultra Hydraulic Jack Plate with 4 inch set-back ($1,000) - 21 ft Stiffy Hybrid push pole with stainless spike and cover ($750) - Humminbird combination gps/chart plotter/sonar ($750) - Custom stainless steel 3 blade prop ($600) - Custom, removable leaning post on the poling platform (boat will fit in most garages with leaning post removed) ($500) - ShawWing Cavitation Plate ($400) - Spare tire and galvanized wheel ($150) - Blue, inset LED lights wired to night running lights ($100) - Matching Igloo ice chest with seat cushion and mounting brackets ($100) - Boat guides on trailer ($100) - Drift socks with line ($50) - Anchor with chain and line ($50) - Dry storage bag ($40) - Toolbox ($30) Photos: Water on the floor is from the wash. Reinforced support for removable leaning post. Truck not included! LED Lights Any questions or to see the boat, please feel free to drop a line.