Dedicated To The Smallest Of Skiffs banner

1 - 20 of 22 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter #1 (Edited)
2009 East Cape Caimen tiller vented tunnel

Vented tunnel.

Tiller motor.

Yamaha 2009, 50 HP 2 stroke w/4 blade SS PT cupped and 3 blade SS speed prop.

Per previous owner motor had ~120 hours (still using the boat).

Good pressure on 3 cylinders.

Carbon Marine tiller extension

Skiff is white on white w/white rub rail and fly line toe rails

Stern Wang stake out installed port side, pole included

Bob's Jack Plate

Lenco trim tabs

Cushion seat aft and back rest on PP

12 gal powder coated tank

Tibor PP holder

Trim/tilt and jack plate controls beneath PP platform and stbd gunnel

New aluminum lean bars (one T, one U) and new casting platform done by ECC, interchangeable nose/aft

New Yeti 45 with new cousin seat.

Powder coated black Ramlin with mag wheels (those wheels are in Dallas) Removable tongue, new bearings and new tires, spare tire.
Fits in 19.5' x 20' garage with room for car.


New LED navigation lights, new under gunnel LED blue lights.

New 2 bank battery charger.

New battery.

2 battery switches, one for the motor and controls and second for the trolling battery.

All maintenance was done 3 months ago.

Has been garaged kept since 3/2013

Title in hand

Price is $17,000.00 as listed above.

Simple skinny water skiff.

This skiff poles and spins like an absolute dream with minimal freeboard creating a wind-defeating, low-profile stance when fishing. This hull is completely silent when poled and is as comfortable threading narrow back-country creeks of the upper Texas coast as it is on the wide, wind-swept flats of the upper and lower Laguna Madre.

This skiff poles and spins like an absolute dream.

Skiiff with an aggressive entry and large spray rails to ensure a smooth, dry ride.
My skiff is the same as this one on YouTube, here is the link:

Skiff is located at South Padre Island, TX till August 15th, after that date boat is going to Dallas.

Reason for sale, I need bigger skiff so my two sons and wife could go fishing.

My contact 214-two-eight-2-two-six-2-nine or [email protected]
 

Attachments

·
Registered
Joined
·
44 Posts
Discussion Starter #5
I never checked it. I don’t like to run WOT. My sweet spot is 3,500 to 3,800 RPM. I have 4 blade prop on it for the hole shot. I also have prop with 3 blades which I’ve never tested (I’ll post pictures of it too). I’ll let you know after this weekend.
 

·
Registered
Joined
·
44 Posts
Discussion Starter #6
Does anybody have similar set up like mine? If so please let me know what speed are you getting?
 

·
Registered
Joined
·
377 Posts
Nice boat, great builder reputation, GLWS.
 

·
Registered
Joined
·
44 Posts
Discussion Starter #19
Small world, I remember you. Today we went to South Bay. Had some fun, my 7 year old caught red on top water lure. Everybody got excited. Tomorrow we’ll check Rattlesnake area.
 
1 - 20 of 22 Posts
Top