Dedicated To The Smallest Of Skiffs banner

1 - 9 of 9 Posts

·
Wishing I was on the water!!!!!
Joined
·
56 Posts
Discussion Starter · #1 ·
I recently acquired this a few months ago and have decided to readjust some things. ;)  It is a 2002 Mako Inshore 1550 center console with spray rails and a 2002 Honda 50 hp 4 stroke with trim and a stainless 3 blade prop.  I recently noticed my Honda has a crack in the lower unit. :(  I have priced out a complete new unit installed locally for about $1350.00.  I will sell the package as is for $7150.00 or I will replace the lower unit and sell for $8500.00, your choice.  The boat has a recirculating bait well in the front console and a gravity feed aft well.  Poling platform, bimini top, wired for 12v trolling motor with breaker and quick release bracket for a Minn Kota, Lenco trim tabs, push pole holders, and a 15 gallon fuel tank in the bow.  This boat floats very shallow and has tons of storage under the seat and some more in the bow.  All this rides on a Loadmaster aluminum trailer with a torsion axel with bearings recently replaced.  I have all books and papers from the previous owner along with original manuals.  Honda had carb job and tune, fuel lines, and throttle cable in July for about $400.00 and both batteries are only about 1.5 years old.  It also comes with a generic boat cover that does a good job keeping the sun off if you don't have a garage.  If you need more info or some specific photos please drop me a line. 

Thanks for looking,
Jimmy
[email protected]







 

·
Wishing I was on the water!!!!!
Joined
·
56 Posts
Discussion Starter · #2 ·
Some intrest but nothing money exchanged yet, so still available. I might consider adding a Minn Kota 55lb foot control trolling motor for the right deal. ;)

Jimmy
 

·
Wishing I was on the water!!!!!
Joined
·
56 Posts
Discussion Starter · #3 ·
Priced reduced to $6250 as she sits for a week or two, then she goes in for a new lower unit.  I will consider working a trade deal for a Gladesmen.  I am more interested in selling outright though.  I will be happy to provide additional photos and can show in person to those interested.

Jimmy
 

·
Wishing I was on the water!!!!!
Joined
·
56 Posts
Discussion Starter · #4 ·
Re: 2002 Mako Inshore 1550 (New Pictures)

Here are some updated pictures for those interested.  Would like to move this if possible.





 

·
Wishing I was on the water!!!!!
Joined
·
56 Posts
Discussion Starter · #6 ·
Had some visitors but no one to take her home yet. :(  I would like to move this before the end of the year if possible.  I am asking $6250 but will gladly entertain a reasonable offer and include a 55# Minn Kota foot controlled TM which is pretty cool cause you can run it standing on the poling platform. :cool:

Jimmy
 

·
Wishing I was on the water!!!!!
Joined
·
56 Posts
Discussion Starter · #8 ·
Thanks for the offer Josh, I sent you a PM.
 

·
Wishing I was on the water!!!!!
Joined
·
56 Posts
Discussion Starter · #9 ·
Re: 2002 Mako Inshore 1550 (SOLD)

She has departed and gone to a new home. Thanks Microskiff and you know who you are ;)
 
1 - 9 of 9 Posts
Top