Dedicated To The Smallest Of Skiffs banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Outboard Maintenance
    Hey all. We have been having problems with the electric trim on the zuke DF30A on our Cayo 173. First the remote trim switch started acting up, but the one on the tiller still worked fine, then the one on the tiller started acting up. Now we have been put in a couple situations where the...
  2. General Discussion
    One of the rods snapped in half on my 2014 20HP manual trim Suzi. I got the parts in hand to replace but I can seem to knock out the first pin across the mount that the tab attaches to. Im not sure if this is a pressed pin or its just seized up. Before I put force into it can anyone give some...
  3. Boat Yard Basics
    Hey all, I figured this may be a good place to start. So a couple weeks ago I started to notice that while running (2001 Dolphin Renegade Pro w Yam 70 2st), my skiff would trim almost completely starboard and remain that way, making it obviously very difficult to steer etc. This is without...
  4. Boat Yard Basics
    My 2003 Tohatsu, 30hp tiller has a bad seal on the stock trim unit. From ‘Y mechanic, looks like I’ll be spending quite a bit: $1,200-1,500 in order to replace, if I can get lucky and find a stock Tohatsu trim unit that will work. Does anyone else think that’s a bit much? I’m all for a skilled...
  5. General Discussion
    I'm a new owner of a Hog Island Skiff. I run a Tohatsu 50/35 jet tiller. It's a blank slate right now (no add-ons....yet). I have taken it out three times this week- On the two occasions when I was solo, I had a really hard time keeping it on plane. With my two kids (total 200lbs), it was...
  6. Outboard Maintenance
    Hi All, Recently had the actuator go out on my (CMC PT-35 Tilt/Trim). Upon looking for a replacement actuator, I have come across a number of bad reviews for this unit. I was curious if anyone on this site has had any issues with this unit, or if anyone had any suggestions for a suitable...
  7. Outboard Maintenance
    I have a 95 Yamaha 40. #C40PLRT. I am looking for a new tilt trim unit as the old one has seized up and is not working. My question is do I need the same one or can I use another year that could be compatable? And if someone knows where I can find one "cheap" let me know!
1-7 of 7 Results
Top