Dedicated To The Smallest Of Skiffs banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 15 Results
  1. Boating, Fishing and Marine Products for Sale
    Solas Saturn 11-7/8”x10” RH stainless steel propeller Model #1331-119-10 Fits outboard motors with a 13 spline shaft Bought this when I was going through some prop testing and changing and ended up with this as extra. It’s in great shape with only some very minor nicks along the leading...
    $150 USD
  2. Boating, Fishing and Marine Products for Sale
    Awesome condition 19 pitch semi cleaver prop from Powertech. Too much pitch for my boat. Still at a mirror finish and has no dings. Call 8434121836
    $250 USD
  3. Boating, Fishing and Marine Products for Sale
    Power Tech 3 Blade Prop 10x9 Pitch TLR Prop for Tohatsu/Nissan/Merc 4 stroke 30 HP. TLR 3R9PTN30. 10 tooth spine for 3" gearcase. Very lightly used. Like new. Purchased as a backup prop. $100 buyer pays shipping. Thanks for looking. Barry
    $100 USD
  4. Prop Shop
    As most of us do, I’m always looking into what else I can add to my skiff and what can I change up to make better. What’s yalls thoughts on blade count for props? I have a 1998 17ft Pro Sport skiff with a 90 Yamaha on it. Currently have a regular 3 Blade prop on it. Would a 4 blade do much of a...
  5. Prop Shop
    Need prop recomendations for my Bossman Tailspotter. Similar to old Beavertails. Need something that can still hold bite with Jackplate up, improve speed (I can sacrifice some holeshot, but I dont want to ruin it completely), and lower RPMs at wide open throttle. Would like to see mid 30s...
  6. General Discussion
    I have a Mercury 60 hp 4-stroke (not the bigfoot) and need to know what size and pitch prop would be best. Currently the boat takes forever to get up on plane and RPM's are higher than normal. Any suggestions will be much appreciated.
  7. Prop Shop
    I’m trying to ask Jack Foreman about working on a prop I have. What all does he do, for all of y’all that have one from him? How much does it cost? Can he use a prop I already have and rework it?
  8. Prop Shop
    I have a 2017 Ankona SUV 17 with a 50 suzuki and am looking to find a good backup prop. My current is the stock stainless 3-blade, 11 3/4" x 15 and it runs well. I am looking for the same prop, but can't seem to find it for sale anywhere. The closest I can find is a 11" x 15. Is the 3/4" going...
  9. Prop Shop
    I recently re-powered a 1998 Mitzi 15 with a 2020 Suzuki DF30a. The stock prop is a 3 blade 10.25" x 12p. My hole-shot is pretty lousy with this prop. The second person has to sit on the bow until I get on a plane. Cruising and wide-open performance seems fine. The DF30a RPM range is spec'd at...
  10. Boating, Fishing and Marine Products for Sale
    Powertech! Yamaha stainless propeller as new in box. With tax new prop is $350; SALE $250. Bought to try pitch and ended up going to a higher pitch. Fits 40hp-140hp Yamaha motors. This is the semi cleaver standard style Yamaha skiff propeller. Tampa Bay Area, Barkley 727-743-3763.
  11. Prop Shop
    Hey guys I am new to props and out boards but I bought a sweet 2004 Yamaha 15hp two stroke for my gheenoe high sider. Everything is great on the motor but it came with a four blade stainless prop. I have heard from multiple people and forums that a 4 blade prop will be much slower than a 3 blade...
  12. Boating, Fishing and Marine Products for Sale
    Bought new in 2016 for ETEC 60. Boat sold with 3 blade and now have no use for remaining prop. Prop has only 2 small blemishes I could locate which I included in images attached. I would consider prop to be in excellent overall condition. Prop was used during winter tide fishing for increased...
  13. Boating, Fishing and Marine Products for Sale
    Was used once for testing, and not allowed to ship back after use. So pretty much new, still in the box, 4-blade stainless prop for Evinrude/Johnson. It is a 13x21 and part number is 0763968. I had it on a 2016 E-tec 60hp. Sells brand new for just under $400, selling this one for $250 plus...
  14. Prop Shop
    Hey guys- could anybody point me towards a specific general purpose prop for this setup? Its a new-to-me, light, no-liner, no trolling motor East Cape Glide. Current prop is wrecked and has no markings to indicate brand, size/pitch/etc. thanks for the help!
  15. Introduce Yourself
    Good evening, It's my first time ever signing into a forum of any kind but, fishing is my passion and so now I'm here. I have a cayo 173 pretty well outfitted and you can find me out in mosquito lagoon 2 days a week. I have fished several tournaments from the Hobie and a few from the cayo. I...
1-15 of 15 Results