Dedicated To The Smallest Of Skiffs banner


  1. Corona goals?

    Boat Yard Basics
    What projects are you getting done with the limited fishing ramps and stay home orders? I’m going to try to improve his Color match gel coat and make a nonskid mold to patch some areas that I/previous owner messed up. Also remove all these damn screws and their holes. Plus fix a bilge broken in...
  2. 1991 18' Permit Skiff Project

    Boating, Fishing and Marine Products for Sale
    Rare 18 Permit Skiff Project boat for sale. The 18 Permit was built in the late 1980s and early 1990s in Ft Myers, FL as a inshore tournament boat. Tons of storage including 3 plumbed livewells/release wells at 45gals, 30gals and 30gals. Length overall is 18ft with an 8ft beam, this is a...
  3. HEWES Bonefisher - $4500

    Microskiffs For Sale
  4. 1977 MFG Challenger 14 ft project

    Boat Yard Basics
    Hello friends, I have picked up a 1977 MFG Challenger 14 ft fiberglass tri/hull with the title project for only $80 off an estate situation. And it’s needs a lot of work 14 ft Sears Gamefishers and 13 ft Scouts as done Johnsen’s are similar hulls. Has anyone here had one or redone/restored...
  5. $500 dream skiff

    General Discussion
    Just a kid with a project boat. Plan on decking everything, adding flotation, casting platform and poling platform, along with all necessary electronics. Motor overheats and ipilot needs a new motherboard. Should learn a lot along the way.
  6. 1989 Hewes Bonefisher 16 - PROJECT - $1000

    Microskiffs For Sale
    Hey Guys, I have bought an Egret 189, so as much as I would like to keep this project and finish it in due time, I can only fit so much in my shop at one time! Boat is a 1989 Bob Hewe's built Bonefisher 16. This is a pre-MBG hewes. The hull is solid glass, the stringers are wood core...
  7. Dolphin renegade project hull

    Sold/Expired Classifieds
    2001 dolphin renegade I have all of the parts stripped off this boat, hardware, poling platform, trim tabs and rear bench top. Comes with a custom stainless oversized forward casting platform covered in snow camo sea deck. All accessory holes have been glassed in and the top side has been...
  8. ISO project hull 16-18ft

    Microskiffs For Sale
    Looking for a project hull price range 2-4k. Can be any manufacturer. Willing to travel. Text Liam: 912 373 5250 email: [email protected]

    Microskiffs For Sale
    Hey all Looking for a micro/ gheenoe type hull that I can spend some time on. I have also taken a look at square back canoes that would do the trick. looking to be under $1000 for the hull.
  10. 14’ Stumpnocker2 Project

    Boat Yard Basics
    Hello all, my first post here. I’ve been lurking around the site for a few years and figured I’d document a project I picked up a couple weeks ago. Maybe someone can learn from my mistakes and help me out if I run into problems. Excuse me if I’m a little long winded, I like details. I got fed...
  11. CUDA CRAFT - Classic Hull - Project - $1200 (Pompano Beach)

    Sold/Expired Classifieds
    Cuda Craft - 16' Classic Flats boat Hull & Trailer - $1200 Awesome project for the right person who can appreciate this rare and classic hull and has the time and ability to restore it. I believe less than 100 Cuda Crafts were ever made, but they have a strong cult following and lasting...
  12. Carolina skiff j12 build with photos

    Introduce Yourself
    Hi all been waiting to post photos of my Carolina skiff j12 build I started with a bare hull added a mercury 15 4 stroke and a grab bar from there I installed lights a push pole and a bilge pump I took it out for the first couple runs down by goodland Florida and could hit 28 mph with two people...
  13. New (to me) Riverhawk: suggestions wanted

    General Discussion
    Picked up an old river hawk. Raised floor needs replacing. Does any body have pictures or suggestions as to where to start. Thanks
  14. Anyone have any deck material left over?

    Boat Yard Basics
    Looking for divinycell or like material. Lightweight for my gheenoe. Orlando area.if you have any left from a project, hit me up. Thank you D
  15. Pre-Build: Looking for Input on 14' Stumpknocker

    Bragging Spot
    Hey guys, just signed up after buying my first boat. I've been browsing here for a while as I was looking for a starter boat/mini project. I'm not looking to do a total overhaul, I don't have the skills yet. But I am wanting to plan out some modifications on this boat to help me learn some new...