Hey guys, I’ve looked around the website (still new and learning my way around it) and I didn’t find the answer I was lookin for, so I apologize if this has already been asked but,
I’m getting ready to start rebuilding my little Johnsen skiff, I’m going to have to completely rebuild my transom...
Hi! I'm Chris. Nice to meet you. I've been reading your posts, and was hoping to get some advice after some long, somewhat incoherent rambling...
At the beginning of the year, my wife and I moved down to Virginia Beach, and as someone who has traveled to flats and keys from Charleston down...
Probably a newbie question here, but can most all transom's hold the weight of a 200 lb guy on a transom mount poling platform. Just seems like a lot of added stress on the transom to me. I have a 1992 scout 141 sport with a 2001 yamaha 40 2-stroke on it that weighs 191 pounds. 40 is its max HP...
Looking for poling platform pros and cons. Will not pole a lot but seems like a good place to fish from when running the trolling motor or when kids are on the bow. Your favorite design or pics would be nice. Friend owns a fabrication shop said he could make what ever I can come up with. Pics...
First $6,000 or best offer. Cash only.
Custom 17' Flats skiff with poling platform, loaded, with 2004 Yamaha 90 HP and trailer. This is a fishing machine, with many innovative features.
These boats were designed and built by a NASA engineer in Cocoa, FL for three years, 1987 - 1990. This is a...
Adding a poling platform onto my skiff and was thinking of using starboard for the actual top. Has anybody ever done this and had success? I am particularly wondering about what thickness I need. There is a big price different between 1/2 inch and 3/4 inch. Would 1/2 inch do it?
(I'm new to MicroSkiff, so please let me know if this is posted incorrectly.)
I want to add a poling platform to my Yamaha, G3, 18' tunnel jon. I intend to use it in the Southeast USA, Florida to Texas chasing bonefish, tarpon, reds, etc. as applicable. I plan to spend the month of May in...
I find myself fishing alone quite a bit and trying to pole my skiff off the stern platform sinks it too much to get a good draft without someone on the bow. I have been poling on the bow, basically backwards till I can spot something then spin it around 180 (if it's wide enough) and try to cast...
I know a lot of you aren’t fans of these boats, but it’s my first Hells bay, and I came from a Gheenoe 15’4 so I still feel like it’s a step up haha. Anyways I make poling platforms, casting platforms, and grab bars ect.
Just wanted to show them off a little haha.
I need help with poling platform ideas. I have a 13 Gheenoe and want something that sits a little higher then a cooler. I have good balance so I’m not worried about that. I have a friend that works with aluminum so he can make whatever I want. Post pics and give me some ideas
Custom built 14' Skiff
2003 Mercury Tiller Long shaft
Fixed Bobs Jack Plate
Poling Platform by Quality T-Tops
6 year old build, solid boat and everything works as it should
Tarpon Springs FL
2008 ranger phantom 168.
75hp Evinrude etec w/400 hours. Motor has been meticulously maintained and is spotless internally. Has a three blade stainless prop. Will push the boat at 35mph loaded. Boat has new cranking battery.
Bobs machine shop 6” jack plate with swim...
17' Ankona Native SUV 2012, Seafoam Grn
Center console, Poling platform, livewell
Poling platform has removable professionally fabricated railing across rear of platform for my security.
Bobs Machine Shop low water pickup
Power jack plate
Lenco electric trim tabs
See attached pics, I have some minor bubbling coming up at two of the feet bases on my platform. I'm looking for options if anyone knows how to take care of this without having to do a full removal and powder coating of the entire structure. The rest of the coating is in perfect...
Carbon fiber poling platform by Carbon Marine. Was mounted on my boat when I bought it but I removed before use because it's too short for my OB motor. Nice discount on this beauty that is literally like new. $1350.
36" x 22" top
28 1/2' tall
31" OC spread front legs