Dedicated To The Smallest Of Skiffs banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 23 Results
  1. Microskiff Classifieds
    This listing is for my 2023 Towee Colusa Pro with 20 hp Tohatsu electric start engine. I was recommended to go with the pro trailer in galvanized steel. It was described as a better choice for a light boat when doing any travel distance. I’ve had the boat a little under a year. I went to the...
    $14,750 USD
  2. Power it up with Electronics
    Hey all, I'm currently in the build process of a new skiff and working through the accessory options on the table. Boat is being built by Biscayne Boatworks and I chose to go with their newer 18' model. I'll be posting pics in a week or so once the custom gel color arrives and the hull begins...
  3. Sold/Expired Classifieds
    Selling my LT25 Gheenoe. I haven't even had it for a year but I just don't have time to use it. The boat is older as it's a 2007 but it is in great shape. The motor was practically new when I bought it and has under 30 hours. This skiff is ready for the water and there's not many more upgrades...
    $12,000 USD
  4. Power it up with Electronics
    Looking to add a GPS Remote Trolling motor to my 16' skiff (400 - 500 lb weight) and wanted to see if anyone has suggestions on the best for the money. Also what LB Thrust should I be using? I will do some current fishing so that is a factor on Thrust. Thanks!
  5. General Microskiff Discussions
    So I'm about to run wiring through my Gheenoe for my trolling motor. It's a 45 lbs. Minn Kota Riptide and pulls 42 max amps. When everything is said and done, the wiring will run between 15-20 ft. According to the charts on Minn Kota's website, if I go to 20 ft. I need to be running 4 awg...
  6. Power it up with Electronics
    The other day while fishing I noticed my tm start squeaking more and more throughout the day. I was in anchor mode and when I was ready to continue my track, it randomly started running slow on me. I pulled it out of the water and it seemed like the prop slipped outwards. I could spin the prop...
  7. Boating, Fishing and Marine Products Classifieds
    Selling for a friend. Came off of a 24’ Sportsman. 2018 Minn Kota Ulterra 80lb. thrust trolling motor. Puck is included. No remote currently. Shaft recently replaced. Located in the Wilmington area.
    $1,100 USD
  8. Boating, Fishing and Marine Products Classifieds
    May 2019 Minn Kota 12V Trolling motor parts for sale. I've converted my 12V Terrova to a 24V system. Selling in good working order: 1) 12V 55lb thrust w/54" shaft Trolling Motor (motor and shaft only) 2) Prop for 55lb motor 3) 12V Control Board w/i-Pilot connection 4) 12V Battery Meter 5) 12V...
  9. General Microskiff Discussions
    So I bought a four year old skiff recently, yea the one that floats in 2 tablespoons of water but has a TM? 2015 Minn Kota I needed a shear pin and release lever and had them in less that two weeks for a total of 10 dollars including shipping! Love it when companies keep supporting their...
  10. Boating, Fishing and Marine Products Classifieds
    For Sale: Minn Kota Trolling Motor Plug and Receptacle MKR-26 Part no: 1865128 Price: $100 obo shipped CONUS Location: Jacksonville, FL Contact: 9 zerofour eight64 thirty6 hundred or direct message me here. Condition: New in packaging Notes: I bought this kit last year from Hodges Marine and...
  11. Sold/Expired Classifieds
    SOLD! One of a kind classic Gheenoe with professionally built center console steering with grab bar. 20hp tohatsu w/68 hours and counting: fresh oil change w/synthetic. Always flushed, washed and garage kept. - Ipilot riptide trolling motor w/remote - Bilge pump - aerator in live well...
  12. Microskiff Classifieds
    Selling for a friend: 2015 Beavertail Micro. Boat is located on Martha’s Vineyard in Edgartown, MA 02539. Boat is powered by a 2015 30 hp Evinrude. Options include steering wheel upgrade, Livorsi controls, moonlighter push pole, removable minn kota ipilot trolling motor-12volt 55lbs, yeti...
  13. Boat Yard Basics
    Anyone on here have a superskiff and mounted a quick release bracket for their minn Kota trolling motor on the bow? I’m having a hard time figuring out how to through bolt it with the minimal room in the front anchor locker. Also had anyone converted their minn Kota riptide Rta 17 to use a...
  14. Sold/Expired Classifieds
    2012 ECC Caimen with liner and closed in bulkheads 2012 50hp Suzuki tiller steer 90 hours on boat and motor Lenco trim tabs Atlas jack plate Galvanized Ramlin trailer Minn Kota Riptide 55 trolling motor 2 Odyssey batteries with onboard charger Simrad Go7 GPS V Marine push pole holders Tibor...
  15. Sold/Expired Classifieds
    Breaks my heart. But this skinny water machine is up for sale to make room for a new poling skiff. For sale: One of a kind 2015 Towee Calusa Black powder coated poling platform Full electrical package w/ running lights, bilge pump and trolling motor pre-wire 55 lb thrust Minn Kota riptide...
  16. Boat Yard Basics
    Wanting to offset the trolling motor bracket on my boat to help clear fly line. When mounting the QRB I notice everyone cuts off the corner to be flush with the deck but looks like it’s cuts off a screw hole. Do I need to add a new screw hole or will I be ok with just the 3. Any pictures would...
  17. Power it up with Electronics
    Hey everybody just wondering if anybody has put one of these on their microskiff and if so which is better and why. I have a 13 1/2 ft micro and am thinking of getting one of these two. right now I'm leaning towards the terrova since it seems to be easier to drop in the water or stow away and...
  18. General Microskiff Discussions
    Ok, so I just bought a Xi5 for my river boat and want to install a quick release puck on my skiff as well. Problem is, I can only seem to find the entire bracket. All I want is the center puck piece, am I missing something?
1-18 of 23 Results
Top