Dedicated To The Smallest Of Skiffs banner

evinrude

  1. General Discussion
    More. That's all I want. Just a little bit more. ...Currently have a 2020 etec 60 on my 2015 East Cape Fury. Love the boat and have not had one single issue at all with the motor. Approx 100 hours on the etec. Boat runs 33 with me and full gear, slightly trimmed, tabs up. Buuuttttt...I have a...
  2. Microskiffs For Sale
    2008 Evinrude E-tec 40 hp. Under 200 hours use. Strong/solid engine. 1 pull start. Water ready. Homestead, FL area. Wood stand included. Delivery negotiable. Asking $3,200 No low-ball offers. contact me for more photos. [email protected]
  3. Outboard Maintenance
    Hey I am trying to find out what drive shaft to get, to replace the one in my 28L, so that I can make it into a standard, short shaft motor. I was told that the 28 only ever came as a long shaft, so it does not seem that I can simply order a 28 short shaft drive shaft, to replace it with. Any...
  4. Microskiffs For Sale
    Selling for a friend: 2015 Beavertail Micro. Boat is located on Martha’s Vineyard in Edgartown, MA 02539. Boat is powered by a 2015 30 hp Evinrude. Options include steering wheel upgrade, Livorsi controls, moonlighter push pole, removable minn kota ipilot trolling motor-12volt 55lbs, yeti...
  5. Sold/Expired Classifieds
    Boat has been SOLD! Thanks! 15’6 Custom Built Flats boat that has just been finished. It has divinyle cell stringers, nyda core and carbon fiber deck, divinyle cell transom, brand new aluminum fuel tank, all new marine tin coated wiring, Hummingbird Helix 5 gps/depth finder, Boss mgr350b...
  6. Boating, Fishing and Marine Products for Sale
    Hey guys I’m looking for an outboard for a skiff 2016 or newer could be new old or used 40hp or 50hp no tiller or if you know of an older boat for sale with a newer outboard on looking at 5k or lower don’t mind if 2 stroke or 4 stroke prefer 2 or know of any places that may have new outboards...
  7. Boating, Fishing and Marine Products for Sale
    For sale: 1995 16ft sea-n-sport by South Seas dory skiff: Lapstroke hull rides smooth and dry, floats in less than 6 inches of water, no-frills slot machine. Has the below features: Bilge pump, anchor and navigation lights that are controlled on a lighted switch panel lowrance GPS/depth...
  8. Boating, Fishing and Marine Products for Sale
    I am selling a 2010 40 Etec tiller with tilt trim 750hrs fully serviced and runs great. 2500.00 or make a offer call. 904-753-6379
  9. Boating, Fishing and Marine Products for Sale
    Was used once for testing, and not allowed to ship back after use. So pretty much new, still in the box, 4-blade stainless prop for Evinrude/Johnson. It is a 13x21 and part number is 0763968. I had it on a 2016 E-tec 60hp. Sells brand new for just under $400, selling this one for $250 plus...
  10. Sold/Expired Classifieds
    Like new 2016 Ankona Copperhead flats boat 16'4" with 2015 Evinrude E-Tec 60hp with 4 blade Rogue stainless prop (less than 150 hours). Great running, dry ride flats boat, and lightweight for easy polling, floats in about 5"-6" depending if one or two people on board. Listed at $22,000 with all...
  11. Boating, Fishing and Marine Products for Sale
    Sad to say I have to sell my 2012 Vantage VHP. I bought it used with 223 hours on it, it now has 267 hours, haven’t been able to run it as much as I like, and certain personal situations changed so hopefully it will go to someone who enjoys it as much as I have. 2012 Vantage VHP Whisper...
  12. Boating, Fishing and Marine Products for Sale
    Selling 2001 Mako 1700 Flats inshore series 2012 90 Evinrude Etec - Minn Kota iPilot 24v 2018 Trolling motor - 2 XS Power D1200 deep cycle Batteres to power the trolling motor - Push Pole (Not the best but it does the Job) - Storm Grey Seadek in cockpit, Polling Plat Form, Top of Bow...
  13. Introduce Yourself
    Hey guys I've been looking for a 14ft Kennedy craft hull to mount my 50HP OMC short shaft on. Has anyone put this much HP on one of those hulls? I'm worried about how much freeboard I will have at the transom when it is in the water.
  14. General Discussion
    Hey everyone new to the fourm here. I’m about to buy a gheenoe 15’4 with no motor. My question is what’s the heaviest motor you would safely hang off the back of one of these. I have a 1978 Evinrude 15 horse that I think will be perfect but I have to get it running again first. I also have a...
  15. Boating, Fishing and Marine Products for Sale
    2008 ranger phantom 168. Asking $18,000 75hp Evinrude etec w/400 hours. Motor has been meticulously maintained and is spotless internally. Has a three blade stainless prop. Will push the boat at 35mph loaded. Boat has new cranking battery. Bobs machine shop 6” jack plate with swim...
  16. Microskiffs For Sale
    selling my ETEC, it’s a 2009 with 518 hours. Runs perfectly. Is in excellent shape and well maintained. Power head was replaced less than 150 hours ago. Brand new lower unit. $3600 or reasonable offer. In no hurry to sell. Motor is still on my skiff so you are able to fully test it on the...
  17. General Discussion
    I am close to buying a used boat with an almost new 2017 25hp e-tech that I would sell in order to upgrade. Motor has around 20 hours on it, warranty through 2020, power tilt, skeg is clean, stock prop. What might this be worth and how hard is it to find a buyer for a used motor in this...
  18. Microskiffs For Sale
    Hello, I am selling my 1979 Challenger Bonefish flats skiff. This skiff was completely restored in late 2015, with 300+ man hours logged over a years time. Boat is 16' long, floats in a true 7-9 inches of water with 2-3 people. Runs 30mph at 5000rpm loaded with 3 people 36mph wot with 2 people...
  19. Boating, Fishing and Marine Products for Sale
    My new motor is ordered and have to move my current setup. The Mercury 2016 4-stroke 15 hp all manual pull start no/electric short shaft has been used 8 times just for the no motor zone so it maybe has 20 hours on it at most. Still has 1 1/2 years left on the 3 year warranty. Everything is...
  20. Microskiffs For Sale
    **SOLD** $19,300 Need it gone to start my new build Contact me on MicroSkiff or e-mail at [email protected] For sale, 2015 (delivered in mid-December) Beavertail Micro 16 Skiff with 2015 30-hp Evinrude E-TEC tiller outboard and Peterson aluminum trailer. Located in Naples. Clear title in...
Top